RM1500A Rule Rule-Mate 1500 GPH Fully Automated Bilge Pump 12V

RULE MATE 1500 GPH BILGE PUMP 12V

Manufacturer's Part Number: RM1500A

Rule-Mate 1500 GPH 12 Volt Fully Automated Bilge Pump

The Rule-Mate 1500 GPH pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".

Rule-Mate Intelligence
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8".

• 1500 GPH 6819 LPH at 0' 13.6V
  
• All-in-one pump and switch
  
• Extra long life heavy duty motor
  
• 1" NPS discharge with 1" AND 1 1/8" screw-on ports
  
• Three year warranty

• Owner's Manual

Disclaimer: Descriptions and pictures are provided by the manufacturer and may be used for multiple variations or parts.

Manatee Max ships from multiple locations across the United States.