25SA Rule 500GPH Electronic Sensing Bilge Pump 12V

$92.49
(No reviews yet) Write a Review
SKU:
MMCW64159
UPC:
042237104786
Shipping:
Free Shipping to the 48 Contiguous United States!* AK, HI & PR Shipping Calculated At Checkout.
Storewide Savings!:
Purchase any 2 or more items to receive multiple item discount at checkout.
Adding to cart… The item has been added

Description

RULE 500 GPH ELECTRONIC SENSING 12V BILGE PUMP

Manufacturer's Part Number: 25SA

500GPH Electronic Sensing Bilge Pump - 12V

New Rule 500 GPH automatic submersible bilge pump. Part number 25SA. Replaces the discontinued Rule 25S bilge pump. Has a new anti-airlock design with backflow prevention and threaded discharge for multiple port options. Has the same base footprint as the 25S.

In the next generation sensing bilge pumps, the 500GPH S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes.

Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!

All that plus the added benefits of our standard bilge pump:

  • Check valve included with hidden air vent to prevent vapor lock.
  • True electromagnetic suppression EMC
  • A built-in thermal cell that protects the pump and the vessel when things get too hot


These are the smallest automatic pumps available on the market!


Specifications

  • Runs on 12V DC power
  • Draws up to 1.6 amps at max flow
  • Requires 4A fuse (not included)
  • Discharge port is 3/4″ hose or 3/4″ NPSM
  • Dimensions are 4.2″ (107mm) high x 2.9″ (74mm) width x 2.5″ (64mm) depth (not including discharge port)


Features

  • Automatic electronic sensing – No float switch needed!
    • Checks for water every 2.5 minutes by running for a half second
    • Consumes 0.2 amps per day
    • Keeps more water out of the bilge than a similar float switch setup
  • Ignition protected
  • High-efficienty, low amp motor
  • Non burn-out when dry
  • Stainless steel shaft
  • Includes back flow preventer
  • ISO 8849 and ISO 8846 marine certifications
  • Easy clean snap lock strainer

Disclaimer: Descriptions and pictures are provided by the manufacturer and may be used for multiple variations or parts.

Manatee Max ships from multiple locations across the United States.