Description
NAVISAFE PORTABLE NAVILIGHT 360 DEGREE 2NM TRICOLOR
Manufacturer's Part Number: 305KIT2
Portable Navilight 2NM - TriColor w/Bendable Suction Cup Mount
The Navilight Tricolor 2NM - US Coast Guard approved for 2 nautical miles includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is battery operated, uses super bright LED light, is water proof, floats and attaches almost anywhere through its double magnetic mounting system.
The green as well as the red lights show an unbroken light over an arc of the horizon of 112,5. The white Sternlight shows an unbroken light over an arc of the horizon of 135. All lights work independently, in a combination of all three or red/green together.
Examples of usage:
*Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs
On a power-driven vessel of 12M or more in length but less than 50M in length:
- As green or red sidelight
- As sternlight
On a power-driven vessel of less than 12M in length:
- as green or red sidelight
- as combined green / red
- as sternlight
On a sailing vessel underway:
- as green or red sidelight
- as sternlight
On a sailing vessel of less than 20 meters in lengths as backup light:
- Tricolor lantern at or near the top of the mast
Specifications:
- USCG Approval, 2 Nautical Miles
- 5 Modes: Tricolor Masthead light 135 white, 112,5 red, 112,5 green, BiColor side light, red side light, green side light, white Sternlight
- Floatable, waterproof 20M and air-tight
- Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
- Powered by three AAA batteries not included
- Size: H = 35mm, Diameter = 68mm
- Weight net: 118g
Modes / approximate burn time:
- 16 green / red / white LED, 360 TriColor lantern / 12hrs
- 10 green / red LED, 225 Bi-Color sidelight / 20hrs
- 5 green or 5 red LED, 112,5 sidelight / 38hrs
- 6 white LED, 135 Sternlight / 32hrs
Bendable Suction Mount
Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.
Examples of Usage:
Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:
- The outboard engine
- The steering console, the windshield or any place on the hull where the lights are seen best
- On canoes and kayaks with a smooth and flat surface
Specifications:
- Secure suction cup base
- Quick release suction cap
- Bendable shaft moves through 180
- Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces
- Size: L = 68mm, H = 157mm
- Weight net: 80g
Disclaimer: Descriptions and pictures are provided by the manufacturer and may be used for multiple variations or parts.
Manatee Max ships from multiple locations across the United States.
