Description
CE SMITH 5' BUNKBOARD GUIDE-ONS
Manufacturer's Part Number: 27600
5' Bunk Board Guide-Ons (2)
Product Description
Carpeted bunkboards provide proper center loading even in wind or side current conditions. Adjustable boat guides can be fine-tuned to work with your boat and your trailer. The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull. Guides will help to center your boat during loading and to hold the boat during transport.
- 1-1/2" square pre-galvanized uprights, angled out at 75°
- 2''x 4'' x 60" untreated Southern yellow pine boards tilt to hug the hull and are covered with high grade marine carpet
- Height of 21'' with adjustment out to 13" from frame on each side
- Can be mounted on top of frame for extra height
- Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high
- 1 pair
- Installation Instructions
- Made in the USA.
For larger trailer frames check out CE Smith's Large Frame U-Bolt Kit, part #11416.
Pre-Galvanized Steel
- Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side). Pre-galvanized parts can oxidize. It is recommended that they be primed and painted with a rust preventative for galvanized metal.
*For larger trailer frames check out CE Smith's Large Frame U-Bolt Kit part #11416.
Disclaimer: Descriptions and pictures are provided by the manufacturer and may be used for multiple variations or parts.
Manatee Max ships from multiple locations across the United States.
